Mi-T-M 16-0445 Gun 3/8" NPT F Zytel Shell

The Mi-T-M 16-0445 Gun 3/8" NPT F Zytel Shell directs high-pressure water through the spray wand while providing trigger-controlled operation. Wear, internal blockage, and affect pressure washer operation.

This part may resolve the following problems:

• Trigger fails to activate water flow.

• Water leaks from the gun housing.

• Reduced spray pressure at the gun.

• Trigger remains stuck after releasing.

• Inconsistent water discharge during operation.

Trigger Does Not Activate

Quick Check: Inspect trigger movement and verify inlet connection remains unobstructed.

Fix Suggestion: Wash the internal trigger mechanism and restore smooth component movement carefully.

Prevention Tip: Flush gun after use preventing internal debris accumulation and sticking.

Water Leaks From Gun Housing

Quick Check: Examine shell, fittings, and seals for visible leakage signs.

Fix Suggestion: Tighten loose fittings and renew worn sealing components as needed.

Prevention Tip: Avoid excessive tightening that may damage housing or fittings permanently.

Reduced Spray Pressure

Quick Check: Search inlet passage for debris restricting normal water circulation completely.

Fix Suggestion: Remove internal obstructions allowing unrestricted water flow through gun assembly.

Prevention Tip: Use filtered water minimizing contaminants entering pressure washer accessories regularly.

Trigger Remains Stuck

Quick Check: Verify trigger pivot operates freely without binding or obstruction present.

Fix Suggestion: Lubricate approved moving points restoring proper trigger return operation properly.

Prevention Tip: Store gun clean preventing residue buildup around trigger pivot mechanism.

Customer Experience: The Mi-T-M 16-0445 Gun 3/8" NPT F Zytel Shell fit correctly, allowing more consistent trigger operation and even water discharge during routine pressure washer use.